Construction estimating services in Weymouth, MA

The figures we cite come from the U.S. Census Bureau Building Permits Survey and cover permits issued by the city itself for new privately-owned residential units only. That means additions, renovations, commercial buildings and public projects are not in the count. In 2025 Weymouth issued permits for 157 residential units, up from 44 in 2024, with 141 of those units in multifamily buildings. Use the numbers as a demand signal, not as a full picture of construction volume in the city.

Of the 157 residential units permitted in Weymouth in 2025, 141 were multifamily, about 90 percent, and the permitted value was $35M, or about $225,500 per unit. That mix reflects the Boston-area pattern of infill apartment and condo buildings on redevelopment parcels rather than a lot of single-family subdivision. For an estimator, it means the takeoff has to handle repeated unit types, common-area MEP, elevator and stair cores, and fire-rated assemblies. Our multi-family estimating services are built around that unit-mix approach.

We price material and labor with ZIP-code adjustments, so Weymouth lines reflect the Boston metropolitan market rather than a statewide average. Ready-mix concrete, lumber and mechanical equipment all carry delivery costs that vary by supplier and by how tight the site is. We note the pricing basis on the takeoff so you can compare it against your own quotes. If your supplier pricing differs, we can reprice the affected divisions without rebuilding the whole estimate.

Send the architectural, structural and MEP drawings as a single PDF set, plus any specifications and the bid form if there is one. If the project is a renovation, a survey or existing-conditions drawing helps. Tell us the construction type, the number of stories and whether there is a basement or podium. We return the takeoff in Excel and PDF, organized by CSI MasterFormat division, with marked-up plan sets showing what was measured.

Most projects come back in 24 to 48 hours, and rush turnaround is available when a bid date is close. The schedule depends on the size and completeness of the drawing set. A single-family plan set moves faster than a three-story multifamily building with full MEP drawings. If you are missing sheets, tell us up front, because we will list the assumptions we made rather than guess silently and let the gap show up in your bid.

Yes. Footings, foundation walls, slab-on-grade, elevated slabs, retaining walls and rebar are taken off as separate Division 03 lines with their own units. In Weymouth, frost depth and shallow bedrock both affect footing elevations, so we measure from the foundation plan and note where the drawings show stepped or deepened footings. If you only need the foundation package priced, that is a normal request and it does not require the full building takeoff.

We take off plumbing fixtures, water and waste piping, HVAC equipment and ductwork, and electrical devices, fixtures and feeders from the drawings. On multifamily work, the unit mix drives the counts, so we build the takeoff by unit type and then multiply by the number of each type. Common areas, corridors, stairs and the service entrance are carried separately. Confirm the adopted plumbing, electrical and energy code editions with the Weymouth building department, since amendments change what gets installed.

We measure in Bluebeam Revu and PlanSwift and price with RSMeans data adjusted by ZIP code. The deliverable is an Excel workbook and a PDF, both organized by CSI MasterFormat division, along with marked-up plan sets so you can see exactly what was measured and where. That format lets you drop our quantities into your own pricing sheet, compare them against subcontractor quotes, or hand the marked-up set to a supplier for a material quote.

We cover Weymouth and the surrounding region, including Medford, Taunton, Chicopee, Revere and Peabody, and the rest of Massachusetts. Pricing is adjusted by ZIP code, so a takeoff for a project a few towns over uses the labor and material rates for that location rather than Weymouth's. If your project is outside those cities, send the address and we will confirm coverage and the pricing basis before we start.

Wind provisions change the hardware count, not just the framing count. On a Weymouth project we look for the design wind speed and exposure category on the structural sheets, then carry the hold-downs, anchor bolts, shear wall nailing and continuous load path details those require. Roofing gets the same treatment: perimeter and corner zones need more fasteners than the field. If the drawings do not state the wind criteria, we flag it as an assumption and ask you to confirm with the designer.