Construction estimating services in Newnan, GA

We do not publish a flat price because scope drives it: a single-family shell is a very different takeoff from a full MEP and finish package. Send the plan set and we will quote it. Turnaround is 24 to 48 hours for most projects, with rush available if your bid date is tight. Deliverables come as Excel and PDF organized by CSI MasterFormat division, with the marked-up plan set so you can trace every quantity back to the sheet it came from.

We cover the full CSI MasterFormat range, from Division 02 sitework and Division 03 concrete through Division 26 electrical and Division 31 earthwork. For Newnan single-family work, the heaviest divisions are typically 03, 06, 07 and the MEP divisions, because clay soils, engineered framing and code-driven mechanical scope carry most of the risk. We organize the takeoff by division so your subcontractor quotes can be compared against the same structure.

Yes. We price with ZIP-code-adjusted material and labor rates using RSMeans data, so the labor burden reflects the Newnan and Coweta County market rather than a national average. That matters for trades where local crew availability moves the number, such as concrete flatwork, framing and mechanical rough-in. We show the rate basis on the takeoff so you can see what was assumed and adjust it if your own crew rates differ.

Clay affects three quantities at once: stripping depth, structural fill under pads and pavement, and underdrain or footing drain. We take those from the geotech report and the grading plan rather than assuming a default depth. If the report calls for over-excavation and replacement, that becomes its own line item in cubic yards, separate from mass excavation. When no geotech is available, we note the assumption on the takeoff so the number can be revised once the report is issued.

Yes. Metro Atlanta is a major logistics and industrial market, and that shows up in the Newnan-area pipeline as tilt-up and pre-engineered metal buildings with large slab areas, dock equipment and heavy electrical service. Those projects move the quantity weight into Division 03, Division 05, Division 08 for doors and dock hardware, and Division 26. Our commercial estimating services and industrial estimating services are the right starting point, and we can split the takeoff by bid package if you are sending scopes to multiple subs.

We do, though the local permit mix is heavily single-family. Multifamily takeoffs are usually done by unit type and then multiplied by the unit count, with the common areas, corridors, stairs, elevator and amenity spaces taken off separately. That structure lets you compare a three-bedroom unit type against a two-bedroom without redoing the whole building. Our multi-family estimating services cover both the unit-type matrix and the common-area scope, including the fire-rated assemblies that drive wall and door quantities.

A complete PDF plan set is the minimum: architectural, structural, civil, and the MEP sheets if you want those divisions priced. Specifications, the geotech report, the window and door schedule, and any addenda help us avoid assumptions. If you only have a partial set, send it and we will tell you which sheets are missing before we start. We work in Bluebeam Revu and PlanSwift, so we can also open native Revit or CAD files if that is what you have.

The permit figures come from the U.S. Census Bureau Building Permits Survey for 2025. That survey counts new privately-owned residential units permitted by the city itself, so it covers single-family and multifamily housing starts and excludes commercial, industrial and renovation permits. In Newnan, all 141 units permitted in 2025 were single-family, which is why the residential scope dominates the local takeoff work. Commercial and industrial projects are still estimated here, but they do not appear in that residential-only count.

Yes. We can deliver the takeoff organized by CSI MasterFormat division, by bid package, or by your own cost code structure if you send it. Most general contractors want the division format with a separate summary sheet, while subcontractors usually want the quantities in their own trade scope. Tell us the format up front and we will build the workbook that way rather than reformatting after delivery.

Yes. Along with Newnan we cover Dunwoody, Gainesville, Peachtree Corners, Milton, Douglasville and Kennesaw, and the rest of the state through our Georgia construction estimating services. Pricing stays ZIP-code-adjusted, so a takeoff for a project in one of those cities reflects that city's material and labor rates rather than Newnan's. If your project sits just outside Coweta County, tell us the site address and we will set the rate basis to the right ZIP code.